16
Connections
Press INPUT SELECT to select the desired mode to use the TV as a monitor.
Operate your VCR as usual.
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.
1. Connect a TV Game to the TV/DVD.
2. Press GAME. The GAME mode screen appears.
•This TV/DVD has the GAME mode function (see page 24).
Left side
Camcorder
To Audio/Video OUT
Audio/Video cable (not supplied)
Left side
Audio/Video cable (not supplied)
To Audio/Video OUT
INPUT SELECT
GAME

Connecting to a VCR

Connecting to a TV Game

Connecting to optional equipment
You can enjoy VCR, camcorder or TV game with connection to external
input.
Notes:
• You can also change the TV screen to the desired mode by pressing the CH +/– buttons.
•The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different types of signal
generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection
diagrams. You'll need to consult each component's Owner's Manual for additional information.
: Signal flow
: Signal flow
: Signal flow

Using the audio/video inputs

Press INPUT SELECT repeatedly to select the desired mode.
“LINE1”, “LINE2”, “GAME”, “COMPONENT” or TV channel will display on the screen for 4 seconds.
Note: In the DVD mode this key will not operate.
LINE 1
To Audio/Video OUT
Left side
(yellow)
(red)
(white)
Audio/Video cable
(not supplied)
VCR
(yellow)
(red)
(white)
(yellow)
(red)
(white)
TV Channel LINE 1
(Rear lower left) LINE 2
GAME (LINE 2 IN)COMPONENT
(Left side)
To AUDIO(L/R)/VIDEO IN
To AUDIO(L/R)/VIDEO IN
To AUDIO(L/R)/VIDEO IN
Note: Picture might be muted for some VCR playback. This is not a malfunction of this unit.
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.

Connecting to a camcorder

J5N00201A [E] (P14-25) 6/8/04, 7:34 PM16