Toshiba SD-P4000 owner manual Symptoms Possible Solutions DVD, Remote Control,  About the LCD

SYMPTOMS	POSSIBLE SOLUTIONS	PAGE
DVD
Playback doesn’t start.	• No disc is loaded.	31
	• The disc may be dirty. Clean up the disc.	7
	• The unit cannot play CD-ROMs, etc.	8
No picture.	• TV/DVD selector is not set correctly.	31
	• Check the input selector of the amplifier is set properly.	–
No sound.	• The unit is in the special playback mode.	33
	• Select the correct Audio Output position on AV amplifier.	16
Picture is distorted during fast	• The picture will be distorted occasionally.	–
reverse/forward playback.
Stopping playback, search, slow-	• Some discs may not do some of the functions.	–
motion play, repeat play, or
program play, etc. cannot be
performed.
No on-screen display.	• Select Display On.	44
No surround sound.	• The setup does not match your stereo system.	16
The unit or remote operation key	• Turn off the unit and unplug the AC power cord for several min-	–
is not functioning.	utes, then replug it.
Playback does not start when the	• Check the RATING LEVEL setup.	45
title is selected.
Audio soundtrack and/or subtitle	• Multilingual language is not recorded on the DVD disc.
language is not changed when		38
you play back a DVD.
No subtitle.	• Some discs have no subtitles.	38
	• Subtitles are cleared. Press the SUBTITLE button.
Angle cannot be changed.	• Multi-angles are not recorded on the DVD disc.	37
“ ” appears on the screen.	• The function is prohibited with the unit or the disc.	33
REMOTE CONTROL
The remote control does not	• Aim the remote control at the remote sensor.
function.	• Operate within approx. 5 meters or reduce the light in the room.
	• Clear the path of the beam.	13
	• The batteries are weak. Replace the batteries.
	• Check the batteries are inserted correctly.

About the LCD

•The color LCD is manufactured using extremely high precision technology, but even so may include certain pixels that do not operate properly (that do not light, that remain lit constantly, etc.). We do our best to keep the number of these defective pixels to a minimum, but please understand that they cannot be completely eliminated even with the most advanced manufacturing technologies available today.

•The fluorescent tube which illuminates the panel from the inside will deteriorate with use. (The standard life length is about 10,000 hours of continuous use at normal temperature.) When the LCD becomes dim, flickers, or does not illuminate, contact your dealer for replacement.

•The brightness of the LCD monitor differs slightly depending on the viewing angles. Adjust the angle to obtain the best viewing. (The recommended angle is 90 degrees to the monitor.)

Others

49

J5N00201A [E] (P47-51) 49 6/8/04, 4:22 PM