Toshiba SD-P4000 owner manual To obtain a higher quality picture, About, To stop playback

Basic playback

Playing a disc (continued)

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this unit, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.

About		DVD	VCD	CD
The	DVD	VCD	CD	icons on the heading bar show the playable discs for the
function described under that heading.
	: You can use this function with DVD video discs.
VCD	: You can use this function with Video CDs.
CD	: You can use this function with Audio CDs and CD-R/RW CDs.

DVD

VCDCD Basic playback

To pause playback (still mode)	To remove the disc
Press PAUSE during playback.	Press EJECT.

POWER

PLAY

STOP

PAUSE EJECT

To resume normal playback, press PLAY.

•The sound is muted during still mode.

Remove the disc after the disc comes out.

To stop playback

Press STOP.

Notes:

•If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 8 and 45).

•Some discs may take a minute or so to start playback.

•When you set a single-faced disc label downwards (ie. the wrong way up) and press the EJECT button or the PLAY button on the unit, “Reading” will appear on the display for 30 seconds and then “Incorrect Disc” will continue to be displayed.

•Some discs may not work the resuming facility.

•Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 39.

•Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

•Do not move the unit during playback. Doing so may damage the disc.

•Use the EJECT button to unload and eject the disc. Do not push the disc while it is moving. Doing so may cause the unit to malfunction.

•Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.

•In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the POWER button on your remote control once the movie is completed.

•There may be a slight delay between you pressing the button and the function activating.

32

J5N00201A [E] (P31-35) 32 6/8/04, 4:08 PM