31
Basic playback
No Disc
Reading
Press STOP to end playback.
Resuming facility
•The unit records the stopped
point, depending on the disc. “ ”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
•If you press STOP again or un-
load the disc (“” appears on the
screen.), the unit will clear the
stopped point.
On the TV-screen, “No Disc” changes to “Reading” and
then playback commences.
DVD
VCD
CD
Preparations:
•When connecting to other equipment, turn the power off.
1Press POWER on the unit or on the remote control
to turn on the unit.
The Power indicator will light.
•Every time you press POWER, the TV/DVD starts from
TV mode.
•When using an amplifier, switch on the amplifier.
4
2Press TV/DVD on the remote control to select DVD
mode.
The DVD startup screen will appear on the screen.
“Reading” display will change to “No Disc”. (If DVD
disc has already loaded,
playback will start
automatically.)
3Load the disc in the disc slot.

Basic playback

Load the disc in the disc slot with the label side facing
forward. (If the disc has a label.) Hold the disc without
touching either of its surfaces, align it with the guides,
and place it in position.
Note:
When you playback the 8cm disc, you need an adapter
(not supplied).
•A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press / or / to select title, then press
ENTER. Title is selected and play commences.
6
To start playback in the stop mode
Press PLAY.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the player's operation. Disconnect
the AC power cord once, then connect it again.

Playing a disc

This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc slot as it is closing.
Neglecting to do so may cause serious personal injury. POWER
Basic playback
No Disc
Press VOLUME + or – to adjust the volume.
5
VOLUME 32
VOLUME
+/–
PLAY STOP EJECT
J5N00201A [E] (P31-35) 6/8/04, 4:08 PM31