Toshiba SD-R1102 installation instructions Technical Support, Specifications

SPECIFICATIONS		SD-R1102
DATA CAPACITY	DVD: 2,048
	CD:	2,048 (mode 1)
(bytes/block)
		2,336 (mode 2)
ROTATIONAL SPEED	DVD:	5,053rpm (3.3-8X)
	DVD-R: 1,100-2,800rpm (2X)
	CD:	6,849rpm (13.8-32X)
	CD-RW:4,281rpm (8.6-20X)
	CD-R,CD-RW: 1,700- 3,960rpm (8X)
SUSTAINED DATA	DVD: 4,476 - 10,816KB/sec
TRANSFER RATE	CD:	2,070 - 4,800KB/sec (mode 1)
		2,359 - 5,472KB/sec (mode 2)
ACCESS TIME (Typ.)		DVD	CD
Avg. Random Access		130ms	100ms
Avg Random Seek		120ms	95ms
Avg. Full Stroke		200ms	160ms
DATA BUFFER		2Mbytes
POWER SUPPLY		+5v, +12v
MTBF		100,000 hours
DIMENSIONS (Wx H x D)	5.7” x 1.6” x 7.6” (146mm x 41.5mm x 193mm)
WEIGHT		0.58lbs ( 0.98kg)
MOUNTING ORIENTATION	±10° vertical / ±20° horizontal

TECHNICAL SUPPORT

Technical support can be obtained by calling 949/455-0407 or by sending an email to: toshibadpd@teleplan-ventura.com or visiting our website at:

http://www.sdd.toshiba.com

FCC DECLARATION OF CONFORMITY

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Re-orient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•	Connect the equipment into an outlet	on a circuit different from that to which the receiver is connected.
•	Consult the dealer or an experienced	radio/TV technician for help.

This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user's authority to operate this equipment.

LASER CAUTION

This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model properly, read this Owner's Manual carefully and keep this manual for future reference. In case of any trouble with this model, please contact your nearest "Authorized Repair Center". To prevent direct exposure to the laser beam, do not try to open the enclosure

7