Congratulations on your purchase of a Toshiba CD-RW/DVD-R OM drive and Kit.
The following information will help you in the simple installation of your new
CD-RW/DVD-ROM drive.
CHECKING YOUR KIT PACKAGING
Please unpack your CD-RW/DVD-ROM kit, and assure that you have the follow-
ing items:
lToshiba CD-RW/DVD-ROM Dri ve
lCD-R Blank Media CD
lCD-RW Blank Media CD
lCyberLink PowerDVD™ Software
lVOB InstantCD/DVD Software CD
lCD-RW/DVD-ROM Installation Instructions (this manual)
lQuick Start Guide
lMounting screws (4)
lIDE BUS cable
lDVD/CD sound cable
Additional items you may need that are not included in the kit are:
lPhillips Screwdriver
lMounting hardware (i.e. some computer systems use mounting rails).
SYSTEM REQUIREMENTS
The CD-RW/DVD-ROM kit requires the following:
✔At least 55MB of free hard disk space
✔At least 32MB of RAM
✔*Pentium II processor at 266MHz or higher or....
*Celeron 300A processor or higher or....
*K6-2 processor at 300MHz or higher
✔Display card supporting DirectDraw
✔16-bit or better sound card
✔Microsoft™ Windows 95 or higher
✔Amplified stereo speakers
* These requirements are only required if you are using the CyberLink PowerDVD™
software for movie playback. Toshiba’s CD-RW/D VD-ROM dri ve will work as
a CD-ROM, DVD-ROM and CD-RW when using a lower speed Pentium system.
1