Toshiba SD-R1102 installation instructions Liable for ANY Damages Resulting from Such Data Loss

You have just purchased one of the most advanced storage technologies available. As with any new technology, you must read, and follow all set-up and usage instructions in the applicable user guides and/or manuals en- closed.

WARNINGS

Operating this optical disk drive (the “Equipment”) outside its rated capacities and speci- fications may cause electrical overload, excessive heat, malfunction, erroneous operation, and/or performance degradation. Please handle the Equipment properly in compliance with the warnings provided below.

IF YOU DO NOT COMPLY WITH THESE WARNINGS AND NOTICES, TOSHIBA CANNOT GUARANTEE THE SAFETY, RELIABILITY, AND PERFORMANCE OF THE EQUIPMENT AS IS EXPRESSLY PROVIDED IN THE EQUIPMENT’S SPECIFICATIONS.

Manufacturers and resellers of computer systems (each, a “System”) using this Equip- ment and/or this Equipment itself should notify the end-users of the warnings provided herein and ensure that they comply with these warnings.

1.This Equipment does not involve any over-current protection circuit. You should use an appropriate over-current protection circuit in any System to which this Equip- ment is connected. TOSHIBA SHALL NOT BE LIABLE FOR ANY DAM-

AGES TO THE SYSTEM WHICH DOES NOT HAVE ANY OVER-CURRENT PROTECTION.

2.DO NOT disassemble or modify this Equipment. Toshiba makes no guarantee as to the reliability, safety and performance of this Equipment when unauthorized disas- sembly and/or modification have occurred, whether or not such guarantees are set forth in the specifications. TOSHIBA WILL NOT BE LIABLE FOR ANY

DAMAGES RESULTING FROM SUCH UNAUTHORIZED DISASSEM- BLY OR MODIFICATION.

3.Read carefully and comply with this Product Specification to avoid the risk of data error in the Equipment’s writing operation. Data error would be made by factors other than this Equipment; for example, poor storage media, misuse of the Equip- ment, malfunction in a System. Check whether the original data is correctly copied or stored upon completion of writing operation. TOSHIBA SHALL NOT BE

LIABLE FOR ANY DAMAGES RESULTING FROM SUCH DATA LOSS.

4.Make sure you take all necessary steps to protect your data, such as system backup and/or mirroring disk subsystems. Taking these actions will help avoid the risk of unexpected data loss or data corruption.

5.Manufacturers and resellers of Systems using this Equipment should consider the System’s safety and its data integrity, in order to avoid the risk of damage caused by data loss or data corruption, as well as problems or accidents caused by the System’s malfunction.