Toshiba SD-R1202 installation instructions Checking Your KIT Packaging, System Requirements

Congratulations on your purchase of a Toshiba CD-RW/DVD-ROM drive and Kit. The following information will help you in the simple installation of your new CD-RW/DVD-ROM drive.

CHECKING YOUR KIT PACKAGING

Please unpack your CD-RW/DVD-ROM kit, and assure that you have the follow- ing items:

!Toshiba CD-RW/DVD-ROM Drive

!CD-R Blank Media CD

!CD-RW Blank Media CD

!CyberLink PowerDVD™ Software CD

!VOB InstantCD/DVD Software CD

!CD-RW/DVD-ROM Installation Instructions (this manual)

!Quick Start Guide

!Mounting screws (4)

!IDE BUS cable

!DVD/CD audio cable

Additional items you may need that are not included in the kit are:

!Phillips Screwdriver

!Mounting hardware (i.e. some computer systems use mounting rails).

SYSTEM REQUIREMENTS

The CD-RW/DVD-ROM kit requires the following:

✔At least 55MB of free hard disk space

✔At least 32MB of RAM

✔*Pentium II processor at 266MHz or higher or....

*Celeron 300A processor or higher or....

*K6-2 processor at 300MHz or higher

✔Display card supporting DirectDraw

✔16-bit or better sound card

✔Microsoft™ Windows 95 or higher

✔Amplified stereo speakers

*These requirements are only required if you are using the CyberLink PowerDVD™ software for movie playback. Toshiba’s CD-RW/DVD-ROM drive will work as a CD-ROM, DVD-ROM and CD-RW when using a lower speed Pentium system.

1