Table of Contents |
|
Checking your Kit Packaging | 1 |
System Requirements | 1 |
Media Recommendations | 1 |
Setting Jumpers | 2 |
Placing DVD Writeable Drive inside your computer | 2 |
Connecting Cables | 3 |
IDE BUS (data) Cable | 3 |
Power Cable | 4 |
Audio Cable | 4 |
Completing Installation | 5 |
ATAPI CD/DVD Software Driver | 5 |
Nero6 Ultra Edition Software | 5 |
Media | 6 |
Emergency Eject Function | 6 |
DVD Writeable Drive Front Panel | 7 |
DVD Writeable Drive Back Panel | 7 |
Technical Support | 7 |
Specifications | 8 |
LASER CAUTION
This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model properly, read this Owner's Manual carefully and keep this manual for future reference. In case of any trouble with this model, please contact your nearest "Authorized Repair Center". To prevent direct exposure to the laser beam, do not try to open the enclosure
CAUTION!
•REFLECTIVE OBJECTS SHOULD NOT BE PLACED IN THE DISK SLOT DUE TO POSSIBLE HAZARDOUS RADIATION EXPOSURE.
•USE OF CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN SPECIFIED IN THIS MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Version | Date Published | Revised Contents |
01 | February 2004 | Initial release |
|
|
|
|
|
|
|
|
|
