Toshiba Drive Connectors -SD-R5372, Audio Connectors Atapi Connector Mode Select Jumper

DRIVE CONNECTORS –SD-R5372

Figure 1.SD-R5372 DVD Rewriteable Drive Rear Panel - Connectors

Power	Power is supplied to your DVD drive by the connection with your computer's +5V/+12V
	power cable to the power socket at the back of drive. One side of the plug has
Connector
	chamfered edges, so the power connector fits only one way.

CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in upside-down with power ON.

Audio Connectors

ATAPI Connector

Mode Select Jumper

Supplies Analog and Digital sound to your system

The SD-R5372 DVD drive is connected to your computer system through the ATAPI connector

The mode select jumpers are 6 straight angle pins located on the rear of the DVD drive. By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL (Slave) or MA (Master). (see Setup or additional information).

15