Toshiba SL59 SERIES owner manual Gil

El.04189

4)Preset tare subtraction (A)

	. WEIGHT	PRICE/lb	TOTAL PRICE
Initial	mode:	Ip1	pq
Ex.)	1.50 Tare weight

I

NET

Depress:T cl

1 0000 1

5)Preset tare subtraction (B) : Random Items PLU

	WEIGHT	PRICE/lb	TOTAL	PRICE
Initial mode:	1 0.00 ]	l-F---l	ptiq
	I	l---Gil	[ 0.00	]

Ex.) Tare weight 1.501 lb
Index:		NET
mmm	I
Depress:		I -1.50	1	I	0.00 I
* As for 15lb capacity scale, entry weight for preset tare must be integer times of 5.
Ex.) 1.05,0.05,0.10,	1.15lb
The above does not hold true with.		the 301b scale.			r

*Unit Price called up from PLU file cannot be used for preset tare input.

*Tentative unit price change after calling up from PLU file cannot be excuted except Random Items PLU and open unit price.

NOTE 1: The main circuit in the unit is turned ON when the power plug is connected to the AC outlet. The power of the load cell cannot be turned OFF by the control lock key.

NOTE 2: When the control lock key is turned to “REG” position within about 16 seconds after the power plug is connected to the AC outlet, the test scanning sequence is made, then initial mode is dis- played and the scale is ready for use.

NOTE 3: @ After test scanning sequence, if initial weight is in un-stable condition, all “8” indicated on dis- plays will go on and off.

@After test scanning sequence, if initial weight is out of the zero range which is very important limits for starting operation, ‘*--” will be indicated on weight display.

\If this situation occurs, check whether the platter is touching to something or not, weight being on the platter or not and setting place of scale being on stable or not.

NOTE 4: Depressing direct key which is not stored in PLU data beforehand causes the machine to enter to error mode.

NOTE 5: In case that tare weight is over 20 div. (301b scale: 0.20lb. 15lb scale: 0.1 Olb), please be sure not to issue the tare label by setting Mode switch to MANUAL position.

-21 -