El-04189
6. MAIN CONTROL LOCK
The control lock has eight marked positions.
There are four control keys which will operate these locks, these are:
This key (OP) will access
REG and OFF positions.
the
This key (MAl) will access the
PR2, PRl , REG, OFF and X po-
sitions.
This key (MA2) will access the
PR2, PRl, REG. OFF, X and Z
positions.
This key (SE) will access all
eight positions.
(SE key may be kept with your
TEC representative for servic-
ing.)
J Control lock
PR2 - Date, time, machine No., store code, store address, Bar Code Format, and PLU can be pro-
grammed.
PRl - PLU unit price, direct key and Spacing of a label etc. can be programmed or changed.
REG Machine can be used as a scale and register the data on a label.
OFF - Machine is locked and any further key entry is impossible.
x- Day-Total etc. can be read out and printed out on the paper or label.
The data-memory is not reset to zero. ,
Z - Day-Total etc. can be printed out on the paper or label and the data-memory is reset to zero.
(RAM CLEAR) - Used to clear all memories (all Total and PLU file).
(Depress m Key).
(TEST) I Used to indicate all test status in displays.
.
-7-