Operation section
Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing ON / OFF button only.
| 1 | 7 |
| |
TEMP. |
|
| ON / OFF | |
10 | TIMER SET | FAN | MODE | |
2 | ||||
TIME | SWING/FIX | VENT | ||
| ||||
FILTER |
|
|
| |
RESET TEST | SET CL | UNIT |
| |
5 |
|
|
| |
3 |
|
|
|
8
9
4
6
1 Air volume select button
Selects the desired air volume mode.
2 Timer set button
TIMER SET button is used when the timer is set up.
3 Check button
The CHECK button is used for the check operation. During normal operation, do not use this button.
4 Fan button
FAN button is used when a fan which is sold on the market or etc. is connected.
•If “No function ” is displayed on the remote controller when pushing the FAN button, a fan is not connected.
5 Filter reset button
Resets (Erases) “FILTER ” display.
6 UNIT and AUTO flap button
UNIT (No function)
SWING/FIX
7 Operation lamp
Lamp is lit during the operation. Lamp is off when stopped.
Although it flashes when operating the protec- tion device or abnormal time.
8 | ON / OFF | button |
|
When the button is pushed, the operation starts, and it stops by pushing the button again.
When the operation has stopped, the operation lamp and all the displays disappear.
9 Operation select button
Selects desired operation mode.
10 Set up temperature button
Adjusts the room temperature.
Set the desired set temperature by pushing
or .
OPTION :
Remote controller sensor
Usually the TEMP. sensor of the indoor unit senses the temperature. The temperature on the surround- ing of the remote controller can also be sensed.
For details, contact the dealer from which you have purchased the air conditioner.
5