Toshiba SR-C8002 19/24, CD Audio Test condition Ordinary temperature, Device Configuration Jumper

8.CD Audio (Test condition: Ordinary temperature)

8.1. Analog Out --- in case of the attenuator is set at 0 dB by the command ---

(1)	Output Level	0.8 V (rms)+/-1 dB
(2) Type		Unbalanced
(3)	Load Impedance	47 kOHM min
(4)	Frequency Response	20 Hz to 20 kHz+/-3.0 dB. (at 47 kOHM Load)
(5)	Distortion	0.04 % Max. (at 1 kHz w/20 kHz LPF)
(6) Signal to Noise Ratio		80dB Typ (IEC179 A-Weighted)

8.2.Audio Modes

(1)16 Modes including 'Stereo', 'Lch Mono', 'Rch Mono' and 'Mute' are selectable by command. Default mode is 'Stereo'.

(2)16 Steps of attenuation level for the Audio Output is selectable by command.

Default level is 0 dB.

9. Device Configuration Jumper

9.1. Master Mode Setting

Short-circuit the PIN 47 and PIN 48 of I/O connectors.

9.2.Slave Mode Setting

Open the PIN 47 of I/O connectors.

(Optional)

9.1. Master Mode Setting

Open the PIN 47 of I/O connectors.

9.2.Slave Mode Setting

Short-circuit the PIN 47 and PIN 48 of I/O connectors.

19/24 SR-C8002 Rev.1.0