Toshiba SR-C8002 specifications 18/24, Power Requirements, OP Code Command Description

ATA Command for ATAPI

N o .	OP Code	Command Description
-	00h	Nop
1	08h	ATAPI Soft Reset
2	20/21h	Read Sector (s)
3	90h	Execute Drive Diagnostics
4	A0h	ATAPI Packet Command
5	A1h	ATAPI Identify Device
6	E0h	Standby Immediate
7	E1h	Idle Immediate
8	E2h	Standby
9	E3h	Idle
10	E5h	Check Power Mode
11	E6h	Sleep
12	E7h	Flush Cache
13	ECh	ATA Identify Device
14	EFh	Set Feature

7. Power Requirements
7.1. Source Voltage	+5 V +/-5 % (Operating)
	+5 V +/-8 % (Start up)
7.1.1. Spike	100 mV (p-p)Max.
7.1.2. Ripple	100 mV (p-p)Max.
7.2. Current Drain (Typical value)	+5 V
7.2.1.Sleep	40 mA
7.2.2.Standby (Laser off, Motor off)	70 mA
7.2.3. Continuous Read (Data/Audio)	620 mA	(4-6X)
	900 mA	(10.3-24X)
7.2.4.Idle (Laser on, Motor on)	600 mA	(10.3-24X)
7.2.5. Average (20% Random Access)	900 mA	(10.3-24X)
7.2.6. Maximum (100% Random Access)	950 mA	(10.3-24X)
7.2.7. Peak in executing Access	1,650 mA
(Exclude Spike Current)
*Spike: Less than 1 ms of duration
7.2.8. Write	760 mA	(CD-R/RW)

820 mA (High Speed CD-RW)

18/24 SR-C8002 Rev.1.0