Toshiba STRATA DK16, STRATA DK8 TABLE 1 -A SIMPLE PROGRAM: PROGRAM 33 (STATION HUNTING) , 1-3

PROGRAMMINGPROCEDURES-INTRODUCTION
SECTION 100-816-301
MARCH1993
TABLE 1 -A
SIMPLE PROGRAM: PROGRAM 33
(STATION HUNTING)
Press...
Step BUTTONS + LED keys
# Action description LCD RESPONSE . . .
1. Use an LCD digital or electronic telephone. NO. OF STATION (10 - 29)
Make sure the programming button strip template is JAN 20 SUN 06:43
installed on the programming telephone (see
Paragraph 3.24).
2. *#*#1*2*3
Enter programming mode. PROGRAM MODE
3. SPKR 3 3 HOLD
Access Program 33. System beeps after SPKR key PROGRAM = 33
is pressed to indicate program number may be entered. DATA STORE
4. SPKR
Prepare the system for a station port selection. 33 SELECT =
5. 0 0 - 1 9 (0 0 - 0 9 for DK8)
Select the logical port number of the “Hunt From” station. 33 SELECT = too - lg)
Up to two digits followed by the # key, or a range of ports HUNT To =
can be entered as specified on the record sheet.
6. 0 0 - 19 (0 0 - 0 9 for DK8)
Enter the logical port number of the “Hunt To” point, as 33 SELECT = (00 - 19)
recorded on the system record sheet. Press LED key 01 HUNT TO = (00 - 19)
to delete a digit from Hunt To point ports.
7. HOLD 33 SELECT = (00 - 19)
Secure data in system programming. DATA PROGRAMMED
8. SPKR 33 SELECT =
Prepare system for another selection (go back to
step 5) or exit Program 33 (continue with step 9).
9. # # HOLD 33 SELECT = ##
Secure Program 33 data in system memory. DATA PROGRAMMED
IO. SPKR PROGRAM =
Exit Program 33. Enter another program number or
exit programming mode (go to step 11).
Speaker beeps to indicate it is exiting Program 33.
11. # # HOLD NO. OF STATION (10 - 29)
Exit programming mode. JAN 20 SUN 06:58
1-3