Toshiba STRATA DK16, STRATA DK8 PROGRAM 32 AUTOMATIC PREFERENCE , 2-68

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM 32
AUTOMATIC PREFERENCE
SELECT = Logical Port Number A -Automatic Preference Code:
Enter the Logical Port number of the Enter 00 for no selection.
station having preference defined. DATA = Ringing Code Enter 01 for intercom.
See Note 3 below for entering Enter 0 to disable Ringing Line Preference. Enter 02 for lowest CO line.
a range of ports. Enter 1 to enable Ringing Line Preference. Enter 11 - 18 for Line Groups I- 8.
NOTE: Shaded areas apply to DK16 only
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns Ringing Code 1 and Automatic Off-hook Code 00 for all ports.
3. To enter a range of ports dial the following button sequence:
noMoo
Low p0rr-l L,,, port
4. Automatic Preference applies to going off-hook (lifting the handset) and pressing the Spkr button.
5. This program applies to digital and electronic telephones only; standard telephones always select the system intercom path
when going off-hook (lifting the handset).
2-68