PROGRAMMlNGPROCEOURES-INSTRUCTIONS/SYSTEMRECOROS
SECTION 100-816-302
MARCH1993
another program
more data

nr;;lnr;;lnnnnni-l,,,nnHoll~~*.*~!lSlllllr;;lr;;llHDll!~T;;1T;;1~

Step 1 7777
Enter Program Mode Enter Program Number Enter Program Data 7 Exit Current Program Exit Program Mode
L
See Notes
0
(LED buttons)

FIGURE 2-2

PROGRAMMING BUTTON SEQUENCE OVERVIEW

The System Record contains programming forms for

Programs 00 - 97.

A System Record should be
filled out for each system installed as detailed in Chapters 1 and 2.
Each System Record Sheet is supplemented with a guide at the top of it for entering data from it. The
guide illustrates the button sequence a programmer must press, with the exception of sequences common
to all programs, e.g., entering programming mode (P), exiting current program (Z), and exiting programming
mode (Z). To save space, these common sequences are coded, as illustrated above. The Spkr and Hold
buttons are also coded “S” and “H,” respectively, to save space.
NOTES:
1. Programs 90, 92, and 03 are out of order and placed in front purposely because they must always be completed first and
in this order. Upon completing these steps, begin with Program 00.
2. Do not Press Intercom when entering Step 1.

2-43