Toshiba T2 Series user manual Parity Check, None, Even, ASY and DLY switches

Models: T2 Series

1 24

Page 17

Select the parity check as odd, even or none. Use switches 7 and 8 to set the parity.

The ASY and DLY switches are not used on the EX10-MML11, and should be set to the “Off” position.

Page 11

Image 17

Contents

TOSHIBA CORPORATION − Modbus Module −PROSEC T2-Series USERS MANUALImportant Information Hazard Classifications Safety PrecautionsSafety Precautions About This Guide Contents Page 1. Overview 1 to 1 Configuration 2. System ConfigurationModbus Master Modbus ModuleModbus Master 1 to N ConfigurationPage 3. External Features and Switch Settings4. Specifications MODBUS FUNCTION CODE 5. Modbus Module Operation 5.1. Modbus CommandsT2 COMMAND Data Type 5.2. Modbus Data Types and T2 Register MappingAttribute Modbus NoModbus - T2 Address mapping Example 5.3. Restricted RegistersStation Number 6. Modbus Module Setup6.1. Modbus Module DIP Switch Settings Baud Rate Transmission Rate Baud Rate9600 4800Parity Check ASY and DLY switchesPARITY NONESet the Station number on the rotary switch to Example Configuration SettingsSet the HAD switch to OFF because our address is less than For 9600 baud, the following settings are required BR2 is onSwitch settings for 9600 baud, no parity, and address less than 4 Parity check For No Parity, the following settings are requiredPEN is off EVN is off ASY DLY HAD BR2 BR1 BR0 PEN EVN6.2. Wiring Connection to the Modbus Module 7. CPU Setup for the Modbus Module If the LED indicators are on solid 8. Trouble ShootingIf the LED indicators are not flashing, check the following 9. Additional References TOSHIBA CORPORATION TOSHIBA INTERNATIONAL CORPORATIONTOSHIBA do BRASIL, S.A TOSHIBA