Using the menus (continued)

Default setting menu

 

 

Item

 

Description

RGB

Y/PB/PR

Video

USB

 

 

 

S-video

 

 

 

 

 

 

 

 

 

 

 

 

Projection mode

Sets projection

mode in accordance with

Yes

Yes

Yes

Yes

 

 

 

 

 

 

 

 

 

 

 

 

 

Placement Styles.

p.24

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Standard)

(Rear)

Language

Select one of the languages below for the menu

Yes

Yes

Yes

Yes

and messages.

 

 

 

 

 

 

[

: Enter setting mode] J[

:Selection]J

 

 

 

 

 

[

: Apply]

 

 

 

 

 

 

English/ Français/ Español/ Português

 

 

 

 

 

 

 

 

 

 

Start-up screen

Display start-up screen when power is turned on.

Yes

Yes

Yes

Yes

On

 

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto input search

Set whether the input with

signals is only

Yes

Yes

Yes

Yes

selected or not.

 

 

 

 

 

 

On

 

Off

 

 

 

 

 

 

 

 

 

 

 

 

Fan mode

Sets the cooling fan speed.

 

Yes

Yes

Yes

Yes

Normal

High

 

 

 

 

 

[See note below]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lamp power

Sets the lamp power.

 

Yes

Yes

Yes

Yes

Normal

Low

 

 

 

 

 

[See note below]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power on

Sets whether to turn on the power when the ON/

Yes

Yes

Yes

Yes

STANDBY button is pressed (Manual), or when

 

 

 

 

[See note below]

the power is supplied (Auto).

 

 

 

 

 

 

Manual

Auto

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset all

Press

. (The language is not reset.)

Yes

Yes

Yes

Yes

 

 

 

 

Resets all adjustments and settings to their

 

 

 

 

 

 

 

 

 

 

factory settings.

 

 

 

 

 

 

Yes

 

No

 

 

 

 

 

Note

Set the [Fan mode] to [High] when using the projector at the high altitude (higher than 600m or 2,000 ft.). In the mean time, the system will set the [Lamp power] to [Low] automatically, and is not allowed to change the setting. Do not set Fan mode to [High] when using the projector at a lower altitude.

If [Power on] is set to [Auto] and there is a power outage, the projector will come on once power is restored.

36

Page 36
Image 36
Toshiba TDP-PX10 owner manual Default setting menu, Language