Names of each part on the control panel and remote control
Control panel
3 |
|
5 | 4 |
6 | 7 |
2 | 1 |
Remote Control
| Remote Control |
| transmitter |
1 |
|
3 |
|
2 |
|
8 |
|
9 | 4 |
| |
10 | 13 |
5 | 12 |
| |
| 11 |
Name | : Main Function |
I/ ON/STANDBY button: Turns the power on/off (standby). p.21 | |
MENU/Menu button | : Displays menus. p.27 |
Selection button | : Menu selections and adjustments,etc. p.28 |
AUTO/Auto button | : Automatically adjusts frequency and phase. p.26 |
SOURCE/Source button : Manually selects an input source. p.25
LAMP indicator | : Displays lamp mode. p.22 | |||
ON indicator |
| : Lights when internal temperature too high. p.37 | ||
Enter button |
| : Confirms the selection. | ||
Keystone | / | button | : Adjusts image distortion caused by tilting the projector. p.25 | |
Volume | / | button | : Press the Volume | button to increase the volume. |
|
|
| Press the Volume | button to reduce the volume. p.33 |
Mute button |
| : Cuts off the sound temporarily. p.26 | ||
Blank button |
| : Cuts off the screen temporarily. p.26 | ||
4:3/16:9 button | : Press the 4:3/16:9 button to switch the image aspect ratio | |||
|
|
| from 4:3 to 16:9. p.26 |
|
Note
•For the remainder of this manual, buttons are referred to as follows: Selection buttons ⇒ 
16
