Turning the power on and off | Toshiba TDP-S9 instruction

Turning the power on and off

■Connecting the power cord

1 Insert the power cord connector into the AC IN socket of the projector.

2 Insert the power cord plug into a wall or other power outlet.

Power cord connector

(Supplied)

■Removing the lens cover

Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat.

■Turning the power on

1 Turn on the main power switch

The ON indicator will change to green flashing, indicating standby mode.

2 Press the I/ ON/STANDBY button.

The power turns on, and the following	Remote
2 green indicators light: ON and	Control panel Control
LAMP. After a moment, the start-up
screen appears.

(Green) Flashing

Start-up screen

Operations

CAUTION

•Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight.

•Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.

•Do not place your hands, face, or other objects near the air exhaust. Doing so could cause burns, deform/break the object.

21

Image 21

Toshiba TDP-S9 owner manual Turning the power on and off, Connecting the power cord, Removing the lens cover

Contents

TDP-S9 Svga USA only Safety Precautions Before Using Source of Light Important Safety Instructions Heat Lightning storms Important Safety Instructions Accessories Replacement Parts Important Precautions Power Supply Cord SelectionPlace and Manner of Installation Save Original Packing Materials Exemption Clauses Important Precautions Avoid Volatile Liquid Other Cautions and Informations Remote Control Battery Contents Others Maintenance Checking the package contents Preparations Names of each part on the main unit Names of each part on the control panel and remote control Parts on the rear panel Preparing and using the remote control Loading a Lithium battery into the remote controlOperating the remote Control Placement Placement StylesProjection Distance and Size Before connection Connection Connecting the power cord Turning the power on and offTurning the power on Removing the lens cover Press the I/ ON/STANDBY button again Turning the power off Basic operations Turn on the powerSelect the language Activate the connected device Projector placement angle adjustments Adjusting the screen size and focusTo adjust the horizontal angle, use the tilt adjuster Using handy features Manually selects an input source SourceCorrecting the keystone distortion Keystone Switching the image aspect ratio 43/169 Automatically adjusts frequency and phase AutoPress the remote controls Mute button Cutting off the sound temporarily Mute How to use the menus Using the menus Image menu Using the menu Saturation Video menuTint Sharpness Display menu PhaseTracking Position Language Language menu Advanced menu Using the menu Volume Audio menuMute Immediately replace the lamp when Lamp LED lights amber Lamp replacementWhen the lamp is broken About lamp Lamp Hours Reset Unplug power cord Wait until lamp is sufficiently cooledRemove the lamp cover Pull out the lamp Lamp replacement Lens and main unit cleaningLens cleaning Main unit cleaning Brightness Status display Before calling service personnel Specifications List of general specificationsSpecification List of supported signals RGB signals List of supported signals Hdtv signals SpecificationsList of supported signals Video, S-Video signals Pin assignment of Computer in terminals Separately Sold Product Pin assignment of S-Video terminal