Using the menu, Image menu | Toshiba TDP-S9 specs

Using the menu (Continued)

■Image menu

Use this menu to adjust image-related items.

Item	Description
Contrast	Adjust the image contrast.
	Lower	Higher
Brightness	Adjust the brightness of the image.
	Darker	Brighter
Keystone	Adjusts image distortion caused by tilting the projector.
	Reduce the upper width		Reduce the lower width
Aspect Ratio	Selects this function to fit 16:9, 4:3 aspect ratio. If the input signal is a
	computer signal greater than SVGA or component 1080i / 720p, 16:9
	or 4:3 aspect ratio will be available.
	16:9	4:3
Blank Screen	Blanks the screen temporarily, and selects the screen color when
	Blank Screen is active.
	Switch with	and .
	White/Black/Blue/Gray/Red/Green/Yellow/Cyan/Magenta
White Peaking	White peaking can be adjusted between 0 and 10.
	Switch with	and .
	Setting 10 will maximize the brightness.
	Setting 0 will maximize color reproduction quality.
Red	Manually adjusts red.
	Less red	More red
Green	Manually adjusts green.
	Less green	More green
Blue	Manually adjusts blue.
	Less blue	More blue

28

Image 28

Toshiba TDP-S9 owner manual Using the menu, Image menu

Contents

TDP-S9 Svga Safety Precautions USA only Before Using Important Safety Instructions Source of Light Heat Important Safety Instructions Lightning storms Accessories Replacement Parts Power Supply Cord Selection Important PrecautionsPlace and Manner of Installation Save Original Packing Materials Important Precautions Avoid Volatile Liquid Exemption Clauses Remote Control Battery Other Cautions and Informations Contents Maintenance Others Checking the package contents Names of each part on the main unit Preparations Names of each part on the control panel and remote control Parts on the rear panel Loading a Lithium battery into the remote control Preparing and using the remote controlOperating the remote Control Placement Styles PlacementProjection Distance and Size Connection Before connection Turning the power on and off Connecting the power cordTurning the power on Removing the lens cover Turning the power off Press the I/ ON/STANDBY button again Turn on the power Basic operationsSelect the language Activate the connected device Adjusting the screen size and focus Projector placement angle adjustmentsTo adjust the horizontal angle, use the tilt adjuster Manually selects an input source Source Using handy featuresCorrecting the keystone distortion Keystone Automatically adjusts frequency and phase Auto Switching the image aspect ratio 43/169Press the remote controls Mute button Cutting off the sound temporarily Mute Using the menus How to use the menus Using the menu Image menu Video menu SaturationTint Sharpness Phase Display menuTracking Position Language menu Language Using the menu Advanced menu Audio menu VolumeMute Lamp replacement Immediately replace the lamp when Lamp LED lights amberWhen the lamp is broken About lamp Unplug power cord Wait until lamp is sufficiently cooled Lamp Hours ResetRemove the lamp cover Pull out the lamp Lens and main unit cleaning Lamp replacementLens cleaning Main unit cleaning Status display Brightness Before calling service personnel List of general specifications SpecificationsSpecification List of supported signals RGB signals Specifications List of supported signals Hdtv signalsList of supported signals Video, S-Video signals Pin assignment of Computer in terminals Pin assignment of S-Video terminal Separately Sold Product