To audio output White (L)/Red (R)

Connection

Before connection

• The MONITOR OUT terminal outputs analog RGB signals or component video signals (Y/

PB/PR) from the COMPUTER 1 IN, COMPUTER 2 IN, or from the COMPUTER 3 IN

Read the owner’s manual of the device you are connecting to the projector.

Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.86 , etc.

Turn off the power of both devices before connecting.

The figures are sample connections.

Connecting with computers

Monitor

Computer (for control)

Computer

Speaker with built-in amplifier

terminal as selected with the INPUT button. If no input is selected, the MONITOR OUT

terminal outputs the input signals last selected among the COMPUTER 1 IN, COMPUTER

2 IN, and the COMPUTER 3 IN terminals. (Digital RGB signals are not output.)

• A computer monitor usually cannot accept Y/PB/PR signals correctly.

Connecting with AV equipment

 

Audio amplifier, etc.

 

 

 

 

 

DVD video recorder, etc.

DVD video recorder,

DVD player, etc.

 

 

 

 

 

p.89

 

To RS-232C

To DVI output

To audio output

terminal

 

 

To audio input

To DVI output

DVI cable-29 pin (not supplied)

To audio output

White (L)/Red (R)

Audio cable (not supplied)

Conversion

adapter BNC-pin

(not supplied)

To Y/CB/CR output Green (Y)/Blue (CB)/Red (CR)

Monitor cable Mini D-sub 15P-BNC

To audio output

To audio

White (L)/Red (R)

input

 

White (L)/

 

Red (R)

Audio cable

(not supplied) Audio cable (not supplied)

Preparations

DVI cable

Audio cable

 

(not supplied)

(not supplied)

Audio cable

 

 

(not

Control cable

 

supplied)

(not supplied)

 

Audio cable

Audio cable (not supplied)

 

(not supplied)

To audio

 

To audio

RGB cable

output

output

 

(supplied)

Monitor cable Mini

 

 

 

D-sub 15P-BNC

 

 

(not supplied)

 

To RGB output

 

 

 

To RGB output

 

Computer

Computer

S-video cable (not supplied)

AV cable

Video cable (not supplied) (not supplied)

 

To video output

To S-video

To audio output

output

White (L)/Red (R)

Conversion adapter

BNC-pin (not supplied)

Green (Y)/Blue (CB)/

Red (CR)

Component cable (not supplied)

To Y/CB/CR output Green (Y)/Blue (CB)/Red (CR)

Audio cable (not supplied)

To audio output White (L)/Red (R)

Notes

Signals are output from MONITOR OUT terminal even in standby mode. From AUDIO OUT terminal, no audio signal is output.

Moving pictures played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a malfunction.

Video recorder,

Video recorder, etc.

DVD video recorder, etc.

DVD player, etc.

 

 

Notes

When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.

Output volume of AUDIO OUT terminal can be adjusted by the VOL button.

24

25

Page 13
Image 13
Toshiba TDP-TW300 owner manual Connection, Before connection, Connecting with computers, Connecting with AV equipment