Toshiba TDP-TW300 owner manual How to use the USB terminal, Setting up the wireless LAN

How to use the USB terminal

This projector can connect with a commercial USB memory and a USB memory card reader that are USB2.0 compliant, a digital camera or the like and display the JPEG files saved in those devices. p.59

(Toshiba does not guarantee the operation of all USB 2.0-compliant devices.) To connect or disconnect a USB device, use the following procedure:

■Connecting USB memory

q Remove the slot cover.

Slightly push the circled part and slide toward the arrow.

Slot cover

wPlug the USB memory.

Make sure the orientation is correct then plug the
USB memory in until it stays securely.	USB memory

■Disconnecting USB memory

qPress the MENU button twice to display the Wireless/Card menu then select and run Slideshow settings and Unplug device.

The processing for disconnecting a USB device starts.

wThe message “Safe to remove the USB device”. appears on the screen.

eUnplug the USB device.

Be sure to perform the above operations. Disconnecting a USB device during operation may cause a malfunction or data corruption.

Precautions

•The USB terminal does not support the supplied mouse remote control receiver or a commercial mouse controller.

•A USB hub is also not supported.

•Turning off the main power or disconnecting the power plug while the USB device is operating may cause a malfunction or data corruption.

Setting up the wireless LAN

■Functions

The following functions are available via wireless communications, when the wireless LAN PC card and dedicated Wireless Utility software p.66 included with this projector are used.

Note: A wireless LAN PC card except the supplied one (or recommended by Toshiba) does not work with this product. Please ask your dealer about the available wireless LAN PC card.

1)Displaying a computer’s screen via the projector

The computer’s desktop screen can be sent, as well as the screens of a variety of software applications, to the projector for display.

2)Displaying an image saved on a computer via the projector JPEG files can be sent to the projector for display.

3)Operating the projector by means of a computer

Some of the same functions available from the remote control can be performed.

■Communication mode

This projector supports both Ad hoc and Infrastructure Communication modes.

◆Ad hoc communication mode

This is transmission mode to communicate

between wireless LAN equipment.

Wireless communication can be performed via the

simple configurations. This function can only be used if the projector is in range of the computer’s wireless signals.

For security reason, confirm the specifications of your computer for the distance that the radio wave can reach. The coverage of this projector may vary, depending on the computer and the surrounding environment. When tested with a PC manufactured by Toshiba with built-in wireless LAN system, the coverage is approximately 60 m with an unobstructed path between the projector and computer placed indoors. This figure is not guaranteed and should be considered as merely a guideline.

◆Infrastructure communication mode

	A mixed wireless and wired LAN can be created
To LAN,	via access points. Connecting to the rest of the
Internet, etc.	world via a wired LAN or the Internet generally
Hub	requires a high level of security.

Access point

Use the appropriate transmission mode for your network environment.

Operations

50 51