Toshiba TDPTW300 owner manual Setting Wireless Utility, Details on individual items

Setting up the wireless LAN (Continued)

■Setting Wireless Utility

If you select Wireless Utility, the following items can be set.

Item				Description
Easy Connect (USB)	[Yes	No]	[Apply:	]
Network settings	Mode: Ad Hoc			Infrastructure
	Channel: Select a number (1 to 11) using the							buttons.
	SSID: Specify a desired character string (1 to 32 characters).
		[	: Move left or right one character.]					[	to	:
		Set a character.]
	Encryption: On			Off
	WEP key: Specify a desired character string.
	(5 to 13 characters, or 10 to 26 digits in hexadecimal notation)
		[	: Move left or right one character.]					[	to	:
		Set a character.]
	DHCP: Use		Not use
	IP address: Enter using the numeric keys of the remote control.
		[	: Move left or right one character.]					[	to	:
		Set a character.]
	Subnet mask: Enter using the numeric keys of the remote control.
		[	: Move left or right one character.]					[	to	:
		Set a character.]
	Gateway: Enter using the numeric keys of the remote control.
		[	: Move left or right one character.]					[	to	:
		Set a character.]
	Confirm: [OK]			[Cancel]		[Apply:	]
Setting	Reset all the network settings.
initialization	Confirm: [OK]			[Cancel]		[Apply:	]
Projector	Specify a desired character string (0 to 8 characters).
name	[ or	: Enter setting mode.]			[	: Select item.]			[	:
	Move left or right one character.]				[	to	: Set a character.]
	Confirm: [OK]			[Cancel]		[Apply:	]
Remote	Specify whether to allow the remote control of the projector from a
control	computer.
	Allowed		Presentation			Forbidden
	Allowed:		The projector always accepts remote commands
			from a computer.
	Presentation: Accepts only the remote commands from the
			computer whose screen is currently displayed via
			the projector (Update automatically) using Wireless
	Forbidden:		Utility.
			Always ignores any remote commands from a
			computer.
WEB browser	Browser authentication: Switch on/off the password
	authentication for access to the setting screen using the
	Projector Configuration Tool.							On		Off

Password: Enter the password used to access the setting screen when the Browser authentication is set to On. A character string (1 to 8 characters) can be specified as desired.

[ : Move left or right one character.] [ to : Set a character.]

Confirm: [OK] [Cancel] [Apply:]

* To enter characters, use the numeric keypad on the remote control.

●Details on individual items

•[Easy Connect (USB)]

This feature allows users to easily connect the projector to a computer over wireless networks, without making network settings via Wireless Utility.

•[Network settings]

<Mode>

Your projector is set to Ad hoc in the factory. Change the setting if you want to use the projector in Infrastructure mode.

<Channel>

Usually, you do not have to set this item. If a network group having the same SSID already exists in the projector’s coverage, the channel is changed automatically to the channel of that network group.

Note 1: If a set channel is in bad connections for wireless connection, try the other channels to avoid the effects of radio waves to select the one in possibly the best communication conditions.

Note 2: To communicate in Ad hoc mode with a computer that cannot change the channel, start up the projector before the computer.

<SSID>

This is an ID code for connecting to specific individuals over a wireless LAN. This may also be called “Network group” or “Network name”. Please read the following carefully.

Note 1: The SSID is set to TDPJ when shipped from the factory. If you leave this setting as it is, security may be compromised due to access by a third party using the “Wireless Utility” within the projector’s possible communication area. Before using the projector, therefore, be sure to set SSID to a character string different from the default.

Note 2: When you use the Ad hoc communication mode, if there is a similar SSID network group (for example TDPJ, TDPJ1, TDPJ2, etc.) in the possible communication area, it is possible that your projector name will not be dis- played in the Wireless Utility projector list column. If this is the case, set SSID to a completely different character string.

<Encryption>

Enable or disable encryption for security purposes.

Note: Encryption is factory-set to Off. If you use the projector with this setting left unchanged, security may be compromised due to access by a third party using the Wireless Utility within the projector’s coverage. Before using the projector, therefore, be sure to set Encryption to On.

<WEP key>

When you have set Encryption to On, the WEP key must be set. For use at an encryption level of 64-bit, specify a string of 5 arbitrary characters or a string of ten characters in hexadecimal notation. For use at the 128-bitlevel, specify a string of 13 arbitrary characters or a string of 26 characters in hexadecimal notation.

Note: Alphabetic characters (A to F, a to f) used in hexadecimal notation are case insensitive; the uppercase characters and their lowercase equivalents are handled to be identical.

Operations

54 55