Toshiba TLF-XD2000 owner manual Operations

Using handy features (Continued)

How to set password (from [Off] to [On])

1Select [Password] in the Default setting 2 menu and press the or

button.

2Select [Password setting] in the password registration, setting menu,

and press the or button.

3Select [On].

4Select [OK] and press the button.

The password entry screen is displayed.

5Enter the password using numeric keys of the remote control.

6The password setting will be set as [On].

How to operate when password is [On]

1Turn on the power.

2The lamp lights and the password entry screen appears.

3Enter the password using numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong, a message appears to prompt you to re-enter the password, and again the password entry screen is displayed. If you enter a wrong password for more than 5 times, the projector will automatically power off and enter standby mode.

How to set password (from [On] to [Off])

1Select [Password] in the Default setting 2 menu and press the or

button.

The password entry screen is displayed.

2Enter the password using numeric keys of the remote control.

3Select [Password setting] in the password registration, setting menu,

and press the or button.

4Select [OFF].

5Select [OK] and press the button.

Note

•While the password setting is [On], the password entry screen will be displayed only when the power is turned on next time.

Operations

32 33