Using the menus (Continued)
■The default setting menu
This menu shows placement status and other settings.
Default setting 1 menu
Item | Description |
|
|
No signal | Set the time to wait for the power to be turned off after the last | ||
power off | operation is made with no input signal. |
|
|
| Off (not turned off) |
| 30 min. |
|
|
| |
Auto input | Set whether the input with signals is only selected or not. |
| |
search |
| On | Off |
|
|
|
|
Beep | Beep when operation is made. | On | Off |
Power on Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the power cord is plugged in (Auto).
Manual 
Auto
Lamp power Sets the lamp power. | Low | Standard |
Default setting 2 menu
|
| Item |
|
|
|
| Description |
|
| |
|
|
|
| |||||||
|
| Projection | Sets projection mode in accordance with Placement Style. p.20 | |||||||
|
| mode |
| (Standard) |
| (Rear) |
| (Ceiling) | (Rear ceiling) | |
|
|
|
|
|
|
| ||||
|
| Fan mode | Sets the cooling fan speed. |
| Standard | High | ||||
|
|
|
|
|
|
| ||||
|
| Key lock | Lock the control panel buttons. |
| : Select On/Off] |
| ||||
|
|
| [ | or | : Enter setting mode] | [ |
| |||
|
|
| [ | :Confirm] | [ | :Select OK to end] |
| |||
|
|
| Press [Cancel] to return. |
|
|
| ||||
|
|
|
|
|
| |||||
|
| Reset all | Press | . (The password and user logo are not reset.) |
| |||||
|
|
| ||||||||
|
|
| Resets all adjustments and settings to their factory settings. |
| ||||||
|
|
|
|
|
|
|
|
| Yes | No |
|
|
|
|
|
|
|
| |||
|
| Password | Password setting | p.31 |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
Detailed description [Fan mode]
Detailed description [Auto input search]
[On]: Automatically searches the signals that can be projected, and switches input from the connected device that outputs the video signals each time the INPUT button is pressed. The input from the connected device that outputs no video signals is skipped.
[Off]: Displays the Input select menu.
Toggle with 
buttons and press 
button. (The input without signals can be selected.)
Input select menu
Input select
Computer 1
Y/PB/PR 1
Computer 2
Y/PB/PR 2
Video
/
shows whether signal is input or not.
Setting [Fan mode] to [High] increases the cooling fan speed. (The cooling fan noise gets louder.) Set this option to use the projector, for example, at high altitude (over 1,500 meters above sea level).
•Do not set Fan mode to [High] when using the projector at a lower altitude.
[Key lock]
Protect from operating errors by locking on the control panel buttons of the projector. (The remote control operations are available.)
Control panel operations are locked after the setting is done, and accordingly operation with the control panel buttons is disabled.
•To release the key lock, set the [Key Lock] to [Off] using remote control. Pressing the [RETURN] button on the projector for 10 seconds also sets the [Key Lock] to [Off]. (When operating the main unit, the 2 indicators of LAMP and TEMP light in orange for 3 seconds, and at the same time the projector beeps.)
Operations
[Power on]
Note that if [Power on] is set to [Auto], then if the power is supplied when restored after a power outage, the projector will come on.
[Lamp power]
When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling fan noise gets quieter.
40 | 41 |
