Floor-mounted projector placement (Continued)

3

Connect the power cord.

 

• Insert one end in the AC IN socket on the projector.

Control panel on the main unit

 

• Insert the other end in a wall outlet.

Light

Light (Orange)

The ON indicator lights in orange and the projector turns to standby mode. The mark of ON/STANDBY on the main unit will also light.

4 Take off the lens cover.

Push both sides of the lens cover to take off.

Installationconnection and

Notes

•Select a room that can be darkened.

•When the projector is moved from a cold location to a warm location, or when the ambient temperature in the projection room has risen suddenly, moisture may condense on the lens or the mirror to blur the projected pictures. In such a case, leave the projector for an adequate time (1 to 2 hours, depending on the room’s condition) before using it so it adjusts to the ambient temperature.

•If the screen is exposed to direct sunlight or other strong light, the projected picture becomes too faint to see. Shut out the light with curtains or other means.

•If the screen and the projector are not installed properly, the projected picture may be distorted.