Turning the power off | CONTENTS 28 |
1 | Press ON/STANDBY after using the |
projector. | |
| An instruction message appears. |
2 | Press ON/STANDBY again. |
|
| |
|
|
| ||
| The LAMP indicator turns off, and the projector turns to | |||
| standby mode. (The ON indicator lights in orange.) | |||
| ON LAMP | ON LAMP | ON | LAMP |
| (Orange) Flashing | (Orange) Flashing | (Orange) | (Off) |
| (Green) | (Orange) |
|
|
3 | After confirming the LAMP indicator turns | |||
off, unplug the power cord. |
|
| ||
The ON indicator turns off.
Notes
• Immediately after the power off, the projector may not be turned on while the LAMP indicator is flashing in green.
• Even after turning the power off, the intake and exhaust fans continue to work for a while to cool the inside of the projector. (When the lamp indicator is flashing in orange.)
Indicators | • Before unplugging the power cord, make sure that the LAMP indicator is turned off. |
|
Operations