| Lamp replacement (Continued) |
|
|
| 58 |
|
|
|
Notes
•The projector displays the total working time at every 1,000 hours (only when plugged in and turned on).
•The lamp should be replaced if the total working time exceeds about 2,000 hours.
•Attach the lamp cover firmly after replacing the lamp. If it is not set correctly, the power will not turn on.
•Use a new lamp when replacing it.
•The lamp is made of glass and is very fragile. Do not touch the lamp with your bare hands and do not jolt or damage it. Do not use an exhausted lamp.
5
6
3
2
1
Load a new lamp.
Slide until it hits the bottom and tighten the two fixed screws.
Attach the lamp cover.
Slide the cover in place and tighten two screws.
Maintenance
7 Reset the lamp timer.
Refer to the lamp instructions for resetting.