Names of the terminals on the rear panel
(1) | (2) | (3) | (4) | (6) | (8) | (9) |
(5) | (7) |
| Name | : Main Function | ||||||||
(1) | CONTROL terminal | : When operating the projector via a computer, connect | ||||||||
|
| this to the controlling computer’s | ||||||||
(2) | AUDIO (L/R) terminal | : Input audio signals from video equipment. | ||||||||
(3) | VIDEO terminal | : Input video signals from video equipment. | ||||||||
(4) | : Input S video signals from video equipment. | |||||||||
(5) | AUDIO IN terminal | : Input audio signals from a computer, or from video | ||||||||
|
| equipment with a component video signal output | ||||||||
|
| terminal. | ||||||||
(6) | COMPUTER 1 IN terminal | : Input RGB signal from a computer or other source or a | ||||||||
|
| component video signal (Y/PB/PR) from video | ||||||||
|
| equipment. | ||||||||
(7) | AUDIO OUT terminal | : Outputs audio signals. | ||||||||
(8) | COMPUTER 2 IN terminal | : Inputs RGB signal from a computer or other source or | ||||||||
| (Also used for MONITOR OUT terminal) | a component video signal (Y/PB/PR) rom video | ||||||||
|
| equipment. It can also be used as MONITOR OUT | ||||||||
|
| terminal by the switch of (9). | ||||||||
(9) | Switch | : Switches between COMPUTER 2 IN and MONITOR | ||||||||
|
| OUT. | ||||||||
|
| COMPUTER 2 IN |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
| (Y/PB/PR 2) |
| |||||||
|
| /MONITOR OUT |
|
|
|
| ||||
|
|
|
|
|
| |||||
Names of each part on the document camara (models with a document camera)
(1) | (2) | (3) | (4) |
|
|
| (9) |
|
| (6) | (10) |
|
| (7) | (11) |
|
| (8) | (8) |
|
| (5) |
|
| Name | : Main Function |
|
Camera |
|
| |
(1) | LED illumination | : The illumination LED for referring documents. p.46 | |
(2) | Focus ring | : Adjusts the focus. p.47 |
|
(3) | Camera lens | : The camera lens of the document camera. |
|
(4) | Camera arm | : Adjusts the camera angle. p.45 |
|
(5) | Infrared remote sensor | : Senses commands from the remote control. |
|
Control Panel |
|
| |
(6) | 50/60 Hz switch | : Matches the shutter speed of the camera to your power | |
|
| system frequency. p.47 |
|
(7) | CAMERA button | : Switches between the camera input and the previous | |
|
| input. p.46 |
|
(8) | CAMERA GAIN button | : Adjusts the camera gain. p.47 |
|
(9) | LOCK (W.BALANCE) indicator : Lights when the white balance has been locked. p.48 | ||
(10) W.BALANCE button | : Switches between auto and locking of white balance. | ||
|
| p.48 |
|
(11) LED LIGHT button | : Switches on/off the LED illumination. p.46 |
| |
Preparations
18 | 19 |
