Connection (Continued)

Turning the power on and off

Notes

When COMPUTER 2 IN terminal (also used for MONITOR OUT terminal) is used as MONITOR OUT terminal, the signal which is input to COMPUTER 1 IN terminal is output.

Signals are output from MONITOR OUT terminal even in standby mode. However, from AUDIO OUT terminal, no audio signal is output.

A computer monitor cannot accept Y/PB/PR signals correctly.

The AUDIO IN terminal doubles for devices connected to COMPUTER 1 terminal and COMPUTER 2 terminal.

When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.

Output volume of AUDIO OUT terminal can be adjusted by the VOL button.

Moving pictures played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a malfunction.

Connecting the power cord

1Insert the power cord connector into the AC IN socket of the projector.

2Insert the power cord plug into a wall or other power outlet.

The ON/STANDBY indicator will change to orange, indicating standby mode.

Power cord connector (Supplied)

Label locations

Removing the lens cover

Remote control

TLP-X2500

TLP-XC2500

Document camera

TLP-XC2500

Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat.

Turning the power on

Control panel

Remote

 

Press the ON/STANDBY

Control

Start-up screen

 

 

 

button.

 

 

 

When the beep sound is [On], the projector beeps, the power turns on, and the ON/STANDBY indicator lights in green. After a moment, the start-up screen appears.

CAUTION

Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight.

Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.

Do not place your hands, face, or other objects near the air exhaust. Doing so could cause burns, deform/break the object.

Operations

Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

24

25

Page 13
Image 13
Toshiba X2500, TLPXC2500 owner manual Turning the power on and off, Label locations, Connection