Operating Basics
Removing discs
To remove the CD/DVD/BD, follow the steps as detailed below:
Do not press the eject button while the computer is accessing the media drive. Wait for the optical disc drive indicator to go out before you open the disc tray. Also, if the CD/DVD/BD is spinning when you open the disc tray, wait for it to stop before you remove it.
1.To pop the disc tray partially open, press the eject button. Gently pull the disc tray out until it is fully opened.
When the disc tray pops open slightly, wait a moment to make sure the CD/DVD/BD has stopped spinning before pulling the disc tray fully open.
2.The CD/DVD/BD extends slightly over the sides of the disc tray so you can grasp it. Gently lift out the CD/DVD/BD.
Figure 4-7 Removing a CD/DVD/BD
3.Push the center of the disc tray to close it. Press gently until it locks into place.
User’s Manual |
