Operating Basics
Open WinDVD BD for TOSHIBA HELP
WinDVD BD for TOSHIBA features and instructions are also explained in detail in "WinDVD Help". Use the following procedure to open "WinDVD Help".
■Click the"Corel Guide" button ( 
) in the Display Area and select "Launch Help" button.
Media care
This section provides tips on protecting data stored on your CD's, DVD's, BD's and floppy diskettes. Handle your media with care. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it.
CD/DVD/BDs
1.Store your CD's, DVD's and BD's in the containers they originally came in to protect them and keep them clean.
2.Do not bend the CD's, DVD's and BD's.
3.Do not write on, apply a sticker to, or otherwise mar the surface of the CD, DVD or BD that contains the data.
4.Hold the CD, DVD or BD by its outside edge or the edge on the center hole - any fingerprints on the surface of the disc can prevent the drive from properly reading data.
5.Do not expose the CD, DVD or BD to direct sunlight, extreme heat or cold.
6.Do not place heavy objects on your CD's, DVD's or BD's.
7.If your CD's, DVD's or BD's become dusty or dirty, wipe them with a clean dry cloth from the center hole outwards - do not wipe in a circular direction. If necessary, you can use a cloth that has been lightly dampened in water or a neutral cleaner but you must not use benzine, thinner or any similar cleaning solution.
Floppy diskettes
The USB floppy diskette drive is available only as an option.
1.Store your floppy diskettes in the container they came in to protect them and keep them clean. If a floppy diskette becomes dirty, clean it with a soft, lightly dampened cloth - do not use cleaning fluid.
2.Never open the shutter or touch the magnetic surface of your floppy diskette - doing this could permanently damage it and lose data.
3.Always handle floppy diskettes with care to prevent the loss of stored data.
4.Always apply the floppy diskette label in the correct location and never apply a new label on top of an existing one - in this instance the label could come loose and damage the floppy diskette drive.
User’s Manual |
