User’s Manual 4-9
Operating Basics
5. User Account Control window is displayed when you click a Run as
administrator. Select Allow on User Account Control window.
6. Swipe your finger across the fingerprint sensor.
7. Click Setting.
8. Place a check mark in Boot authentication if you want to use the Single
Sign-on feature, also check on Single Sign-on.
9. Click “Apply”.
10. “Save succeeded” is displayed. Click “OK”.
11. Click Close.
12. “Are you sure to close this window?” is displayed. Click “OK”.
13. Click Close.
14. “Are you sure to close this window?” is displayed. Click “OK”.
The modied conguration for ngerprint Pre-OS feature becomes effective the next
time the system is booted up.

USB Sleep and Charge function

Your computer can supply USB bus power (DC5V) to the USB port even when
the power of the computer is turned OFF. “Power OFF” includes Sleep Mode,
Hibernation Mode or shutdown state.
This function can only be used for ports that support the USB Sleep and Charge
function (hereinafter called “compatible ports”).
Compatible ports are USB ports that have the ( ) symbol icon.
You can use the “USB Sleep and Charge function” to charge certain USB-
compatible external devices such as mobile phones or portable digital music
players.
n The ngerprint sensor compares and analyzes the unique characteristics
in a ngerprint. However, there may be instances where certain users
are unable to register their ngerprints due to insufcient unique
characteristics in their ngerprints.
n The recognition success rate may differ from user to user.

Fingerprint utility limitations

TOSHIBA does not guarantee that the ngerprint utility technology will be
completely secure or error-free. TOSHIBA does not guarantee that the ngerprint
utility will accurately screen out unauthorized users at all times. TOSHIBA is not
liable for any failure or damage that might arise out of the use of the ngerprint
software or utility.