Connections (Cont’d)
Connecting to Optional Equipment
Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver or stereo system, using the supplied audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1 | Connect one of the DVD Player’s DIGITAL AUDIO |
OUT jacks (OPTICAL O or COAXIAL X) to the cor- | |
| responding in jack on your amplifier. Use an option- |
| al digital (optical O or coaxial X) audio cable. |
2 | You will need to activate the player’s digital output. |
(See “Digital Audio Output” on page 14). |
Digital Multi-channel sound
A digital
Notes
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–Six Channel Digital Surround Sound can only be obtained if your receiver is equipped with a Digital
–To confirm the audio format of the current DVD selection display, press AUDIO.
–Repeated pressing of the AUDIO button may allow you to select between various audio formats available on the disc.
Rear of DVD player
PREPARATION
O |
| X |
| A |
|
| |||
|
|
|
|
|
OPTICAL | COAXIAL | L | R |
DIGITAL INPUT | AUDIO INPUT | ||
Amplifier (Receiver)
Note
This player does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS
multi channel surround, you must connect this player to a DTS compatible receiver via one of this player’s digital audio outputs.
