
Before Operation (Cont’d)
Parental Control
Rating DVD
Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are
|
|
|
| Disc Audio | 8 |
|
|
|
| Disc Subtitle | 7 |
|
|
|
| Disc Menu | 6 |
|
|
|
| Rating | 5 |
| |||||
|
|
|
| Area Code | 4 |
|
|
|
| TV Aspect | 3 |
|
|
|
| Menu Language | 2 |
|
|
|
| Progressive Scan | 1 |
|
|
|
| Digital Audio Output | Unlock |
|
|
|
|
| Change |
| Others |
1 | Select “Rating” on the Setup menu using the |
and buttons. | |
2 | While “Rating” is displayed, press . |
3 When you have not entered a password yet; Install a
When you have already entered a password; Install your
If you make a mistake before pressing ENTER, press CLEAR and install your
4 Select a rating from 1 to 8 using the / but- tons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Unlock: If you select Unlock, Parental Control is not active. The disc will play without restrictions. Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the play- er, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter your
5 Press ENTER to confirm your rating selection, then press SETUP to exit the menu.
Area Code DVD
Enter the code of a country/area whose standards were |
| |
used to rate the DVD video disc, referring to the list | PREPARATION | |
(See “Area Code List”, page 27.). |
| |
Disc Audio | Code Set | |
Disc Subtitle | U S |
|
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
1 | Select Area Code using the | / | buttons on the |
setup menu. |
|
| |
2 | While Area Code is selected, press . | ||
3 Follow step 3 of “Rating” on left. | |||
4 | Select the first character using the / buttons. | ||
| Shift the cursor using / buttons and select | ||
5 the second character using | / | buttons. |
6 Press ENTER to confirm your area code selec- tion, then press SETUP to exit the menu.
Note
Confirmation of your
Changing the 4-digit password
1Follow Steps
2Install your old code, then press ENTER.
3 Select Change using the / buttons then press
ENTER.
4Install the new
5Install exactly the same code a second time and veri- fy by pressing ENTER.
6Press SETUP to exit the menu.
If you forget your 4-digit password
If you forget your password, to clear the current pass- word, follow the procedure below.
1Press SETUP to display the setup menu.
2Use the Number buttons to enter the
The
3Enter a new code as shown above to the left (Rating).