Toshiba VB602M, SD3815 manual Time Search, Selecting the sound enhancement

Operation with DVD, Video CD and Audio CD (Cont’d)

General Features (cont’d)

Repeat DVD VCD2.0 VCD1.1 CD

CHAPT TITLE TRACK DISC ALL OFF

DVD Video Discs - Repeat Chapter/Title/Off

1To repeat the chapter currently playing, press REPEAT.

The Repeat Chapter icon appears on the TV screen.

2To repeat the title currently playing, press REPEAT two times.

The Repeat Title icon appears on the TV screen.

3To cancel Repeat mode, press REPEAT repeatedly until the Repeat Off icon appears on the TV screen.

Video CDs and Audio CDs - Repeat Track/Disc/All/Off

1To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the TV screen.

2To repeat the disc currently playing, press REPEAT two times.

The Repeat Disc icon appears on the TV screen.

3To Repeat of entire all disc contents, press REPEAT three times.

The Repeat All icon appears on the TV screen.

4To cancel Repeat mode, press REPEAT repeatedly until the Repeat Off icon appears on the TV screen.

Note

zOn a Video CD with PBC, you must set PBC to Off on the setup menu to use the Repeat function.

See page 14.

z If you press SKIP twice or SKIP during Repeat Chapter/Track playback, the repeat playback cancels.

Repeat A-BDVD VCD2.0 VCD1.1 CD

A * A B OFF

To repeat a sequence in a title:

1Press A-B RPT at your chosen starting point.

A- appears briefly on the TV screen.

2Press A-B RPT again at your chosen end point.

A-B appears briefly on the TV screen, and the repeat sequence begins (a-b repeat appears on the player’s display).

3To cancel the sequence, press A-B RPT.

Note

If you press SKIP	or	during repeat A-B,
the A-B sequence are cleared.

Time Search
	DVD	0:16:57	- : - - : - -

The Time Search function allows you to start playing at any elapsed time location on the disc.

1Press GUI DISPLAY during playback. The on-screen display appears on the screen.

The Time Search box shows the elapsed playing time of the current disc.

2 Within 10 seconds, press / to select the Time Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

3Within 10 seconds, use the number buttons to enter the required start time. Enter hours, minutes and sec- onds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers.

4Within 10 seconds, press ENTER to confirm the start time.

Playback starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point.

Selecting the sound enhancement

DVD VCD CD NORM. 3D SUR DIALOGUE

Press E.A.M. to select the sound enhancement during playback.

NORM. : Normal sound

3D SUR: This player can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-channel audio from a home theater system.

DIALOGUE: Enhances critical center channel information to make dialogue more intelligible (only when playing a DVD video disc recorded on the Dolby Digital recording system).

•To use this enhancement on audio output from the DIGITAL AUDIO OUT jack, be sure to set “Digital Audio Output” to “PCM”. See page 14.

Zoom DVD VCD2.0 VCD1.1

The Zoom function allows you to expand the video image and to move the focus point of zoomed image.

1Press ZOOM during playback or still playback to acti- vate the Zoom function.

If you press ZOOM repeatedly, the magnification level increases up to six times.

2 Use the / / / buttons to move the focus point off the zoomed image.

3Press CLEAR to resume normal playback or return to the paused image.

Notes

zThe zoom function may not work for some DVDs.

zThe zoom function may not work on multi-angle scenes.

1-50