Toshiba W-604 MTSBroadcast Compatibility, Recording the SAP/Stereo Broadcast, A.SELECT, Selecting a sound, Sounds in playback, Sounds recorded on the tape

RECORDING

MTS Broadcast Compatibility

This VCR can receive or record MTS (Multichannel TV Sound) broadcasts. By connecting the VCR to your stereo system or stereo TV, you will experience the SAP or stereo sound.

Preparation

Connect a stereo TV or stereo system to the AUDIO OUT jacks of the VCR.

Recording the SAP/Stereo Broadcast

1 2 3

4 5 6

7 8 9

0 100

DISPLAY

PLAY

1 On the SET UP screen (page 14), select “SAP SET” usingPLAY or STOP, and set to “ON” usingREW or FF.

TAPE LEnGTH	120	160	180
SAP SET	on		off
COUnTER MEM	on		off
LAnGUAGE	EnG	FRA	ESP

EnD : PROG

REWFF 1

STOP

1, 2 1

A.SELECT

2 Press PROG. twice to exit.

3 Perform a recording.

SAP (Second Audio Program broadcast):

A separate audio program, usually broadcast in a second language with the main language.

Selecting a sound

Sounds recorded on the tape

According to your setting of “SAP SET” on the SET UP screen, the sound is recorded onto different tracks of the tape as below. Set “SAP SET” to “ON” or “OFF” appropriately.

Type of receiving	Setting of “SAP SET”	On-Screen Display		Contents of recorded sound
	on the SET UP	(Press DISPLAY.)		Normal sound	Hi-Fi sound track
broadcast
	screen	“SAP”	“STEREO”	track (Mono)	L	R
Regular	“ON” or “OFF”	not lit	not lit	MONO	MONO	MONO
(monaural audio)
Stereo	“ON” or “OFF”	not lit	lit	MONO (MIXED)	STEREO
Regular+SAP	“ON”	lit	not lit	MONO	MONO	SAP
	“OFF”	lit	not lit	MONO	MONO	MONO
Stereo+SAP	“ON”	lit	lit	MONO	MONO	SAP
	“OFF”	lit	lit	MONO (MIXED)	STEREO

Sounds in playback

You can play SAP and/or stereo broadcasts with this VCR. Press A.SELECT to select a desired sound.

Desired sound	L , R indicators in the VCR display	Sound output
SAP sound	R (right) is on.	SAP
Stereo sound	Both R (right) and L (left) are on.	Stereo

Note

When the TV is connected to the RF OUT terminal of the VCR, the output sound is monaural.

28