ADDITIONAL INFORMATION
Multi Brand Remote Control
The remote control can be compatible with various brands of TV by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs.
|
|
| 1 | |
|
|
| POWER | |
1 | 2 | 3 | CH/TRK | |
4 | 5 | 6 | ||
| ||||
7 | 8 | 9 | TV VOL | |
| 0 | 100 | ||
| 100 | |||
|
|
| ||
|
|
| Number | |
|
|
| buttons | |
|
| PLAY |
| |
|
|
| DISPLAY | |
REW |
|
| FF |
STOP
I.SELECT
ENTER
2, 3
Setting Control Codes
1 Press TV to set the remote control operating your TV.
2 While holding down PROG. enter the two digits of your TV’s brand code (listed on page 30) using number buttons.
3 Release PROG.
4 Point the remote control at your TV and use each button listed below to make sure that your TV is operated correctly.
POWER | To turn the TV on or off. |
CH/TRK | To select TV channels in the upper or lower |
| direction. |
TV VOL | To adjust the sound level. |
I.SELECT | To select an external source such as a VCR. |
Number buttons | To select TV channels. When selecting channels |
| 1 to 9, first enter 0 and then the desired number. |
100To substitute for 100 channel key.
DISPLAY | To turn on or off TV’s screen display. |
ENTER | To use for the TV’s ENTER key. |
TIONINFORMA ADDITIONAL
Important
Some TVs may not respond to all the operations above, or may not be operated at all with this remote control. In this case, operate your TV with its own remote control.
Notes
•For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your TV.
•If you replace the remote control’s batteries, set the brand code again.
29