Steam Clean Procedure – IMPORTANT NOTES
•If a steam clean cycle is initiated without water, press the Clear/Off pad to end the cycle. Wait for the range to cool to room temperature before pouring water into the recessed area and initiating another steam cycle.
•Do not open the door during the Steam Clean cycle. An error beep will sound upon opening the door.
•If a steam cycle is interrupted by opening the door, oven needs to be allowed to
cool to room temperature and another steam cycle initiated.
•Press Clear/Off pad at any time to end the cycle.
•If mineral deposits remain in the oven bottom after cleaning, use a cloth or sponge soaked in vinegar to remove them.
•Some water may drip from the bottom of the oven door. If this happens, wipe it up at the end of the cycle.
•The door gasket may be wet when the Steam Clean cycle finishes. This is normal. do not clean the gasket.
•If soil still remains after cleaning the oven, see the “Care and Cleaning of the Range” section of the Owner’s Manual for additional options.
Copyright 2009 | 41 |
