Toshiba W-608 StoringChannels on the VCR, Incoming Antenna/Cable(CATV) Signals, TV:, CATV:, Incoming Antenna/Cable(CATV) Signals

PREPARATION

Storing Channels on the VCR

This section is required if you receive only normal TV or unscrambled cable channels, or use a cable box between your TV and the VCR.

Incoming Antenna/Cable(CATV) Signals

The VCR scans through all receivable TV and CATV channels and stores only the active ones in your area into the memory. Once the storing is finished, you can select a desired channel using CH/TRK.

Preparation

•Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11).

•Press I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.

Incoming Antenna/Cable(CATV) Signals

1	2	3	Number
4	5	6	buttons
7	8	9
	0	100	100
			I.SELECT
		PLAY	REW
			FF
REW			FF
		STOP	PLAY, STOP

1	Press PROG. to display the MENU screen.
2	Select “PRESET” using FF or REW,
		PROGRAM		SET UP	PRESET
	and press ENTER.
			CLOCK SET
			CH MEMORY
			CABLE BOX / DSS
			GUIDE CH
		EnD : PROG			ENTER

ENTER

1, 6

3 Select “CH MEMORY” using PLAY or STOP, and press ENTER.

PROGRAM	SET UP			PRESET
TV/CATV		TV		CATV
AUTO SCAn		OFF		On
ADD CH			- -	CH
ERASE CH			- -	CH

TO SET CH PUSH 0~9 KEYS

E n D : PROG

4 Set “TV/CATV“ to “TV” or “CATV” using FF or REW.

TV: To store channels received via the antenna.

CATV: To store channels received via the incoming cable.

5 Select “AUTO SCAN” using PLAY or STOP, and press FF to set to “ON”.

The VCR starts scanning and the channels are stored in the VCR in ascending order. When the scanning is finished, the screen automatically returns.

PROGRAM SET UP PRESET

AUTO SCAn 2 CH on

E n D : PROG

6 Press PROG. three times to exit.

16