Confirming the timer programs

Press PROG while timer recording.

The screen for confirming will appear.

 

PROGRAM

 

SET UP

 

 

 

PRESET

 

 

 

 

 

 

 

 

 

 

CH

DATE

On

 

OFF

 

SPD

 

 

 

 

 

P

 

P

 

 

 

2 5

8/30

9:30

M 10:00

M

SP

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

E n D : PROG

This screen can be sure only in the Timer Recording mode.

Changing/cancelling the timer programs

1)If the TIMER indicator is lit, turn the VCR on by pressing POWER.

2)With steps 2 to 9, change the items.

To cancel a program, select the program you want to cancel in step 4, and press CANCEL. The line is then cleared.

3)Press POWER to return to the timer standby mode.

Error indication

The blinking “TIMER” indicator appears in the VCR display if you press both TIMER when:

––a cassette is not loaded.

––the loaded cassette has no safety tab. In these cases, a recording can not be made.

If a power failure occurs during the timer program recording (including VCR Plus+ C3® system recording (page 31))

•When a power failure has occurred, “- -:- -” appears in the VCR display. Since the programmed contents have been cleared, reset the clock and timer programming.

•When power has failed for a short time, the colon of the current time display blinks. The programmed contents are not affected. Reset the clock.

Overlaps of the programs

If two timer programs overlap, the recording start time of program 1 has priority over the recording off time of program 2.

Program 1

(Start time) Program 2 (Start time)

Overlapped portion (not recorded)

RECORDING

27