SECTION
SECTION 4—SAFETY INSPECTION/ TROUBLESHOOTING
NOTE: Every six months or as necessary have a qualified technician perform a thorough inspection and servicing. Routine maintenance will extend the life and efficiency of your tub.
Safety Inspection Checklists
Initially
❑Ensure that the maximum water supply temperature does not exceed 115° F.
❑Ensure that the maximum water pressure does not exceed 65 PSI.
❑Verify the water flow temperature with a separate thermometer.
❑Visually inspect for cracks in the tub surface.
❑Ensure that the door handle locks the door closed.
❑Ensure that the safety pin properly engages the door.
❑Check that all labels are present and legible. Replace if necessary.
Before Each Use
❑Disinfect the tub.
❑Ensure that the maximum water supply temperature does not exceed 115° F.
❑Ensure that the maximum water pressure does not exceed 65 PSI.
❑Visually inspect for cracks in the tub surface.
❑Ensure that the door handle locks the door closed.
❑Ensure that the safety pin properly engages the door.
Every 80-150 Baths
❑Perform the heavy duty cleaning procedure on the tub. Refer to warning on page 30.
Every Six Months
❑Verify the water flow temperature with a separate thermometer.
❑Check that all labels are present and legible. Replace if necessary.
❑Clean RADA valve to remove lime deposits.
Side Entry Whirlpool Tub | 28 | Part No 1118387 |
