Toshiba WLT68 Connecting external equipment, Aerial cables, Scart leads, Always active

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.

SCART 2 (EXT2)

SCART 1 (EXT1)

COMPONENT

VIDEO (EXT3)

CABLE HOLDER

☛	*			could
	a decoder
be Digital		Satellite
or any other				.
compatible			decoder

decoder*

MEDIA REC.

TV

FIXING STRAP

HDMI™ INPUT

SOCKETS

DIGITAL AUDIO OUTPUT

COMMON INTERFACE

media recorder

Aerial cables:

IN/OUT SAT

(DTV MODE ONLY) The Common Interface is for a Conditional Access Module (CAM). There is

access for two CAMs.

Contact a service provider.

PLEASE NOTE: Although this television is able to connect to HDMI equipment it is possible that some

Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.

SCART leads:

Connect the video recorder IN/OUT socket to the television. Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.

Before running Auto tuning put your decoder and media recorder to Standby.

The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

The Digital Audio Output socket enables the connection of a suitable surround sound system. NOTE: this output is

always active.

HDMI™ (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment with digital audio and video output. It is designed for best performance with 1080i and 1080p high-definition video signals but will also accept and display 480i, 480p, 576i, 576p and 720p signals. NOTE: HDMI cables should be

less than 5m.

equipment may not operate correctly.

A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.

We recommend SCART 1 for a decoder and SCART 2 for a media recorder.

If connecting S-VIDEO equipment, set the INPUT for EXT2. See page 32.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press Bto select between DTV, EXT1, EXT2, EXT3C, HDMI1, HDMI2, HDMI3, PC or ATV.

The cable holder can be used for aerial, media recorder and audio cables. Do not use the cable holder as a handle and make sure all cables are removed before moving the television.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

6