31
PC settings – picture position, clock phase,sampling clock, reset, PC media windows3
3
Use Sor Rto adjust until the picture clears.
In the SET UP menu press Quntil PC Setting is
highlighted.
Press OK to select, then Qto highlight Clock
phase.
Use Sor Rto adjust until the picture clears.
1
2
The Clock phasematches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
Clock phase
In the SETUP menu press Quntil PC Setting is
highlighted.
Press OK to select, then Qto highlight Sampling
clock.
1
2
Adjusting the Sampling clockalters the number of pulses
per scan, this will clear vertical lines on the screen.
Sampling clockPicture position
Connect the PC (as shown in the ‘Connecting a PC’
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
Press Bto select PC, then select PC Setting
from the SETUP menu.
1
Press OK. Press Pand Qto select an option,
then Sor Rto adjust the settings.
2
3
In the SETUP menu press Quntil PC Setting is
highlighted.
Press OK to select, then Qto highlight Reset.
Press OK.
1
2
To return to the original factory settings.
Reset
Press and hold {, select PCMedia Windows
and press OK. The screen will show the picture
from a connected PC and the last broadcast
channel being viewed.
1
This features splits the screen allowing a broadcast
programme to be viewed at the same time as a
connected PC.
PC Media Windows
SETUP
Language English
Country UK
AV connection OK
PC Setting OK
MENU
Back
EXIT
Watch TV
1/2PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height –5
Clock phase 0
Sampling clock 0
MENU
Back
EXIT
Watch TV
1/2PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height –5
Clock phase 0
Sampling clock 0
MENU
Back
EXIT
Watch TV
gpg