36
The Frame Setup Menu allows configuration of the PPS, resolution, quality, and sensitivity of camera channels. When configuring the
PPS sliders the BLUE slider represents the PPS the XVR will record during intensive recording and have available for transmitting to
remotely connected systems. The RED slider represents the PPS that will be recorded by the XVR under normal recording conditions.
The total PPS of all blue sliders may not exceed the recording PPS of the XVR unit. The PPS of a red slider may not exceed that of the
blue slider for the same channel. The dual sliders allow configuration of the XVR to record at a lower PPS while still being able to
transmit at a higher PPS to remote connections.
Ex. If a camera channel is set to 25 PPS (blue) and 7 PPS (red), the XVR will record at 7 PPS and users viewing live video remotely
can receive up to 25 PPS.
Frame Setup (4 Channel)
1 Video Format Displays the Video Format (NTSC/PAL).
2 Set Default Resets all camera settings to their default values.
3 Number of Frames Displays the number of PPS that are selected for recording.
4 Frame Select Move the slider to select the number of PPS to record
5 Resolution Sets the recording resolution of the camera channel.
6 Quality Sets the quality of the video recorded by XVR. Lower quality video has a smaller file size
but appears more pixilated.
7 Sensitivity Sets the Keyframe refresh rate. Adjusting this setting can have negative effects on video
quality. Do not change from default setting unless instructed by a system administrator.
8 Video Out Enables video from selected cameras to be viewed on spot monitor display.
9 Video Out Time Select the amount of seconds each camera will be displayed on spot monitor