72
ADVANCED PTZ SETUP
1 Enable Pan/Tilt Enables the XVR to control the PTZ camera.
2 RS-232 / RS-485 Defines how to send the PTZ signal to the camera.
3 Select Camera Selects the current camera to be edited.
4 On-Screen Compass Allows on-screen control of a PTZ camera.
5 Preset and Tour Used to create Presets and Tours for the PTZ camera. Since each camera creates these
in a different way, there can be multiple methods.
6 Address Setting Only available on select PTZ cameras. These options need to be set when there are
more PTZ cameras connected together than there are inputs on the XVR. Setting these
options allows for attaching several XVRs to the PTZ chain.
7 Serial Port Settings Defines the specific settings to transmit to the PTZ.
8 Pan Speed Increases or decreases the Pan speed.
Tilt Speed Increases or decreases the Tilt speed.
Zoom Speed Increases or decreases the Zoom speed.
Focus Speed Increases or decreases the Focus speed.