TP-Link TD-8816 manual 4.3.2 LAN, ADSL2/2+ Ethernet Router User Guide, Bridge Mode

Models: TD-8816

1 55
Download 55 pages 18.54 Kb
Page 24
Image 24
4.Bridge Mode

TD-8816

ADSL2/2+ Ethernet Router User Guide

Subnet Mask and Gateway IP address.

¾Default Route: You should select Yes to configure the PVC as the default gateway to internet from this device.

¾MAC Spoofing: MAC Spoofing feature allows you to change the assigned MAC address of the ADSL Router to a different one, which may allow the bypassing of access control lists on servers either hiding a computer on a network or allowing it to impersonate another computer. You can select Enable and specify a MAC Address for the Router here, or keep the default setting as Disable.

4.Bridge Mode

If you select this type of connection, the modem can be configured to act as a bridging device between your LAN and your ISP. Bridges are devices that enable two or more networks to communicate as if they are two segments of the same physical LAN.

Figure 4-8

)Note:

After you finish the Internet configuration, please click SAVE to make the settings take effect.

4.3.2 LAN

Choose “Interface SetupLAN” menu, and you will see the LAN screen (shown in Figure 4-9). Please configure the parameters for LAN ports according to the descriptions below.

18

Page 24
Image 24
TP-Link TD-8816 manual 4.3.2 LAN, ADSL2/2+ Ethernet Router User Guide, Bridge Mode